Extrusion generates a much more distinctive anisotropy than die-molding. By means of the continuous extrusion process, cylindrical, rectangular/square, or even more complicated cross-sections of several square millimeters up to several thousand square centimeters are produced which are cut to the desired length for further processing.
| Properties | Diameter | Dia meter | Dia meter |
|---|---|---|---|
| 75 - 130 mm | 150 - 250 mm | 300 - 500 mm | |
| Density | 1.65 | 1.65 | 1.65 |
| Specific Resistance | 8.5 | 9 | 9 |
| Compressive Strength in MPA | 20 | 20 | 20 |
| Bending Strength in MPA | 11 | 10 | 10 |
| Elastic Modulus | 1 | 0.98 | 0.98 |
| Ash | 0.5 max | 0.5 max | 0.5 max |
| Properties | Diameter | Dia meter | Dia meter |
| 75 - 130 mm | 150 - 250 mm | 300 - 500 mm | |
| Density | 1.7 | 1.7 | 1.7 |
| Specific Resistance | 7 | 8 | 8.5 |
| Compressive Strength | 30 | 30 | 30 |
| Bending Strength | 12.7 | 12.7 | 12.7 |
| Elastic Modulus | 1.47 | 1.47 | 1.47 |
| Ash | 0.5 max | 0.5 max | 0.5 max |
| Properties | Diameter | Dia meter | Dia meter |
| 75 - 130 mm | 150 - 250 mm | 300 - 500 mm | |
| Density | 1..58 | 1..58 | 1..58 |
| Specific Resistance | 8 | 9 | 9 |
| Compressive Strength | 20 | 20 | 20 |
| Bending Strength | 11.75 | 11.5 | 11.75 |
| Elastic Modulus | 1 | 0.98 | 0.98 |
| Ash | 0.5 max | 0.5 max | 0.5 max |
